WAYS ON ADDING AND REFILLING WINDSHIELD WASHER LIQUID TO THE CAR 

Some car owners are having a problem when it comes to their windshield washer as it doesn’t give any liquid to be sprayed to the glass. It is either that there is something wrong with your car’s windshield washer nozzle or there is no water or fluid in there anymore. There could be some process in putting some liquid to there. You can buy this to your local car companies or to the nearest car mechanic shops. You don’t need to worry if you don’t have tools with you as it doesn’t require anything except for the one that you need to purchase. This can be done when you are having windshield replacement Portland. Here are some of the steps that you can do to add or refill in your car.  

WINDSHIELD WASHER

You need to open the front part of your car as you need to find first where the windshield washer reservoir is located at. To make it very easy for you to find it, you may see a symbol or a picture of a wiper that is wiping to the windshield. If you are having a hard time to see or finding it, then you need to check your car’s manual or user’s guide.  

After looking for the place of it. You may now check if it is full or not. If it says there that is still full then there is something wrong with its part or may be something is blocking down there. Some of the possible reason for the blocked or clogged inside of it are the dirt from the surrounding and the dust accumulated inside.  

If it is too low and then you need to refill it with the proper fluid. Make sure that you will not put too much as it may result and cause of the damage in your car’s part. You need to put back the cap of the reservoir and then make sure the you close it properly. You may go back to your car and try if it is working correctly.  

There are a lot of commercial fluid that is available in the market. If you are living in a certain area where you always experience cold weather or freezing sometimes. Then, you have to make sure that you don’t put water only in there. You have to mix it with other agents that will help not to freeze inside your reservoir. Of course, you need to read the instructions that it says in the label of the fluid. When putting this mixed liquid, you need to have a place where your car park your car smoothly and not into a slope one.  

If you are not so sure about this thing to your car as it is your first time to do this. Then, you may ask help from your friends who knows much about it. You can also visit the nearest mechanic shops. In this way you don’t need to worry about if you are doing the right thing or the wrong one.  

Leave a Reply

Your email address will not be published. Required fields are marked *